WS2801-S-01
WS2801-S-2WS2801-S-3WS2801-S-4WS2801-S-5WS2801-8WS2801-9WS2801-S-7WS2801-S-8

50pcs WS2801 Square IP68 12mm Digital LED Pixels Hyperion Adafruit Lightpack

Compare

£27.60

Out of stock

SKU: WS2801-S-50-KIT Category:

Product Description

Overview

RGB Pixels are digitally-controllable lights you can set to any colour, or animate. Each RGB LED and controller chip is moulded into a ‘dot’ of silicone on a square base. The dots are IP68 weatherproof and rugged. There are four flanges moulded in so that you can ‘push’ them into a 12mm drill hole in any material up to 2mm thick. Two ‘loops’ with holes on the sides of the square base are also available to allow for alternative fitting methods. The pixels are connected by a 4-conductor cable. +5V (Red), Ground (Blue), Data (White) and Clock (Green). Data is shifted down from one pixel to the next so that you can easily cut the strand or attach more onto the end.

They’re typically used to make outdoor signs, but can be used for many more applications such as;
– Ambilight for TV to create amazingly immersive television experience.
– Christmas light displays
– Lit staircases triggered by sensors
– Light painting photography
And many more (see videos and pictures in the listing for some ideas)

Most of the people use these LED strips to build ambilight for TV. Once attached to your TV (se photos for ideas of how to attach them) and connected to compatible device such as Raspberry Pi (recommended) or Arduino with applicable software you are able to make the LEDs project an “extension” of the video played through the device on to the wall.

Raspberry Pi running Raspbmc is suited best for this application since it has a built in support for these lights. See this website for a guide of how to set everything up.

Specification

Voltage: 5V DC
Base size: 22mm (long) x 20mm (wide) x 9mm (high)
LED size: extends 12mm from the base, 12.4mm (diameter)
Beam angle: 120 degrees
Power: 60mA per LED max
Connector: 3 pin JST SM (Input: male, Output: female)
IP66 waterproof

Package List

One string of 50 Square WS2801 LEDs
One 5.5 x 2.1mm Female DC Power Jack Connector Plug (solderless)
One 5.5 x 2.1mm Male DC Power Jack Connector Plug (solderless)