RGB Pixels are digitally-controllable lights you can set to any colour, or animate. Each RGB LED and controller chip is moulded into a ‘dot’ of silicone. The dots are IP66 weatherproof and rugged. There are four flanges moulded in so that you can ‘push’ them into a 12mm drill hole in any material up to 1.5mm/0.06″ thick. The pixels are connected by a 3-conductor cable. +5V (Red), Ground (Blue), Data (White). Data is shifted down from one pixel to the next so that you can easily cut the strand or attach more onto the end.
They’re typically used to make outdoor signs, but can be used for many more applications such as;
– Christmas light displays
– Lit staircases triggered by sensors
– Light painting photography
And many more
NOTE: These RGB LED pixels are not suitable for boblight setups.
Voltage: 5V DC
Size: 38mm (deep) x 12.4mm (diameter)
Beam angle: 120 degrees
Power: 60mA per LED max
Connector: 2 pin JST SM (Input: male, Output: female)
One string of 50 WS2811 LEDs
One 5.5 x 2.1mm Female DC Power Jack Connector Plug (solderless)
One 5.5 x 2.1mm Male DC Power Jack Connector Plug (solderless)