This crimping tool can be used to crimp both male and female versions of DuPont crimp pins onto 18-28 AWG wires to make a custom length cables and jumper wires. The tool has ratcheting action for increased consistency and ease of use.
The easiest way to crimp the terminal on to the wire is to snap the terminal of the holding strip, Insert terminal into the correct slot in the crimping tool and ratchet the crimp tool slowly until terminal is just held in place. Insert the wire from the other end and crimp fully.
Capacity: 0.1 – 1.0mm²
1 x SN-28B DuPont Terminal Crimping Tool